San Jose Navigation GPS Mobile Locator GM-158-USB Bedienungsanleitung PDF herunterladen (Seite 24)

www.malags.com

The number in the blue rectangle

refers to the line number on the grid

carpet.

Lines are gathered by placing the

antenna over the start position (the red

triangle shows the start point and

direction).

Note! Good alignment of the antenna

is vital for good results.

Press the menu option Start Line on the Easy Locator monitor, and move

the antenna to the end of the line. Measurement will automatically stop

when reaching the end of profile line. And then move the antenna to the

next line, and press Next line. See pictures below. You can also press Stop

and move the antenna and press Start Line.

During measurement

When Stop is pressed

Continue in the same manner until the grid is filled, in both directions.

Note! If a line has to be remade, use the option Start Line and measure it

again. If lines before that have to be remade, use the option Previous

Lines.

Once the last profile is filled, press the button is selected,

which leads to the following screen after some minutes of processing:

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 38 39

Keine Kommentare

San Jose Navigation GPS Mobile Locator GM-158-USB Bedienungsanleitung Seite 24